Plastic Pontoonz

We also have plastic pontoon modules available so you can build your own platform

10 hp is all you need for the river	Contemplating the next stage	See our industrial barge pods below

Literally hundreds of people have come to us , because thay want to build their own houseboat and they want floats or tubes or ideas, or they just want something that will suit their intended lifestyle.

We have our manufactured range of houseboats, shown other pages, and now we can offer the builders or the DIY person a range of materials that will leave them with no excuse not to start doing something about their ideas.

Come on Australia, get off the couch, and DO something.

Heres an example of what a single bloke can do in his back yard in a few weekends.

Take a few of our pods, join then together	Build a floor and roof, be proud of your work.
Move your creation from its build site	And place gently in the water, now go enjoy.
So then your mates , say they are coming over for a beer, quickly take it out of the water and add some space.	Its still plenty strong, and you dont have time to build the trailer before the boys get here.
Make sure you have someplace for the Barbie and plenty of seating	Then just Cruise and enjoy the water
	And it doesnt look out of place in the big Marina. Its different, it does what you want it to do, it didnt cost millions and YOU MADE IT.

Features of the PONTOONZ system

The rotomolding of these pods is some of the best we have seen, so they have eye appeal

Each pod spigots into the next so that they have positive location

There is a multitude of ways to build the top frame, to suit your final purpose for the vessel

An aluminum or wooden keel can be used to lock the base of the pods together.

Crustacean growth will not stay adhered to the side of the pods

Very easy to add to the length or floatablility of you craft even after initial build.

All pods are uv stabilised.

Different colored pods can be ordered.

The Pods above here are 1200mm long and have a diameter of approx 600mm .They will support approx 160kg at half flotation. The nose cone is approx 900mm long but CAN NOT be counted as providing any flotation when moored in a normal position.
The pods below here are approx 1300 long and have a cross sectional width of  approx 700mm and will support approx 286 kg at half flotation. The nose cone is an integral part of a main pontoon and CAN be classed as providing flotation